pix32 v5

HolyBro Pix32 v5 is a new flight controller we have developed on the base of FMUv5 scheme, which can be regarded as a variant version of ‘Pixhawk4’.

Category:


HolyBro Pix32 v5 is a new flight controller we have developed on the base of FMUv5 scheme, which can be regarded as a variant version of ‘Pixhawk4’.

The Pix32 v5 is comprised of a separate flight controller and carrier board which are connected by a 100pin connector. It is designed for those pilots who need a high power, flexible and customisable flight control system.

By using a carrier board designed for the style of model you need you can make sure that the physical size, pinouts and power distribution requirements match the model perfectly. Different carrier boards designed for multirotors, fixed wing aircraft, ground based vehicles or even water based models ensure that you have all the connections you need and none of the expense and bulk of connectors you don’t. We have made the carrier board schematics public, you can either make a custom carrier board by yourself or just let HolyBro help you with it.

If you’ve tried to use a PixHawk4 but struggled to make it work with your design then the Pix32 v5 may be the answer with its ability to fit within a custom carrier board with just what you need. As the Pix32 v5 is based on the PX4 and ArduPilot systems you can also take advantage of all of the latest peripherals, software and enhancements offered by those systems for a quick easy setup and flying experience.

SKU11044 pix32 v5

Package Included:
Pix32 v5 *1
Pan head screw M2x6mm *4

SKU18055 pix32 v5 Base board

Package Included:
Pix32 v5 Base Board *1

SKU18057 pix32 v5 mini Base board


Package Included:
Pix32 v5- mini Base Board *1
M2 Male-female brass hex column standoff *4
PLA 3D Printed Insulation Plate *1
Pan head screw M2x8mm *4

SKU20099 pix32 v5 & pix32 v5-Base board & PM02 V3;
SKU20100 pix32 v5 & pix32 v5-Base board & PM02 V3 & GPS Ublox Neo-M8N .

Package Included:

Pix32 v5 *1
Pix32 v5 Base board*1
PM02 Power Management Board *1
GPS Ublox Neo-M8N Modul *1 (Optional)
‘X’ type folding pedestal mount *1 (Optional)
I2C splitter Board *1
6 to 6 pin cable (power&Telem) *3
4 to 4 pin cable (CAN&I2C) *3
8 to 8 pin cable (CAP) *1
7 to 7 pin cable(SPI) *1
DSMX receiver cable *1
PPM/SBUS out cable *1
Debug cable *1
USB (type-c)cable *1

SKU20104 pix32 v5 & pix32 v5 mini Base board & PM02 V3;
SKU20105 pix32 v5 & pix32 v5 mini Base board & PM02 V3 & GPS Ublox Neo-M8N .

Package Included:
Pix32 v5 *1
Pix32 v5 mini Base borad*1
PM02 Power Management Board *1
GPS Ublox Neo-M8N Modul *1 (Optional)
‘X’ type folding pedestal mount *1 (Optional)
I2C splitter Board *1
6 to 6 pin cable (power&Telem) *3
4 to 4 pin cable (CAN&USB) *2
“Y” 6 to 6pin +4pin cable (Telem3&I2C A) *2
7 to 7 pin cable(SPI) *1
PPM/SBUS out cable *1
Debug cable *1
USB (type-c)cable *1

Pix32 v5&mini base Assembly Diagram
installation options:

Downloads:

Pix32 v5
Pix32 v5_technical_data_sheet.pdf
Pix32 v5_Connect-100pin_BreakOut.pdf
Pix32 v5_Connect_100pin(Panasonic-AXK5S-6S)data sheet.pdf
Pix32 v5 BaseBoard
Pix32 v5 BaseBoard Pinouts.pdf
Pix32 v5 BaseBoard Schematic diagram.pdf
Pix32 v5 BaseBoard Layout.dxf
Pix32 v5 BaseBoard ComponentsLayout.pdf
Pix32 v5 mini BaseBoard
Pix32 v5 mini BaseBoard Pinouts.pdf
Pix32 v5 mini BaseBoard Schematic diagram.pdf
Pix32 v5 mini BaseBoard Layout.dxf
Pix32 v5 mini BaseBoard ComponentsLayout.pdf

3D Print:

Pix32 v5 BaseBoard

Pix32 v5_BaseBoard-LowerBodyShellCover
Pix32 v5_BaseBoard-UpperBodyShellCover

 

Pix32 v5 mini BaseBoard

PIX32 V5 mini BaseBoard-PLA 3D Printed Insulation Plate

Some Tips:

https://docs.px4.io/master/en/flight_controller/holybro_pix32_v5.html
https://ardupilot.org/copter/docs/common-holybro-pix32v5.html