Kopis mini-CADDX FPV Version_3inch

The CADDXFPV VISTA KIT is an advanced video transmission module that supports a 5.8GHz digital video signal and 720p 120fps image transmission, with a transmission range of up to 4Km and a minimum endto-end latency within 28ms*,The vista kit can be mounted on racing drone and used with DJI FPV Goggles or a remote controller to transmit video ,control signals and flight controller information wirelessly.

SKU: 30071 Categories: ,

The supply of stardard 1507 motors for Holybro Kopis series has resumed. All Kopis series will be equipped with 1507 stardard motors and T3140 propellers.

Kopis mini(CADDX FPV version)


  • Frame:3mm 3k carbon fiber
  • Flight Controller:Kakute F7 HDV
  • ESC:Tekko32 F3 4in1 45A mini ESC
  • VTx:Caddx Vista Digital HD System for DJI HD FPV
  • Motor:F1507 KV3800(Standard)
  • Propeller:T3140
  • Buzzer included.
  • Battery plug: XT30
  • Wheelbase: 148.6mm
  • Weight:198g(included DJI air unit)
  • Recommend battery: 650mah~1300mah 4s


  • MCU: STM32F745 32-bit processor
  • IMU: MPU6000 (SPI)
  • Barometer: BMP280
  • USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
  • 6 hardware UARTS (UART1,2,3,4,6,7)
  • All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”.
  • Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
  • TF card for Blackbox logging


  • 1x Kopis mini FPV racing drone
  • Caddx Vista Digital HD System for DJI HD FPV
  • 4x T3140 Propeller
  • 1x Carying case
  • 1x Battery strap(installed)



3D Print:



Kopis-DJI FPV_version_DUMP

Spare Parts-Kopis CineWhoop