Kakute F7 mini V3 Stacks

SKU: 20101,20135,20136 Categories: , ,

Kakute F7 mini V3

Specifications:

  • MCU: STM32F722RET6 32-bit processor,216MHz, 256Kbytes RAM, 512Kbytes Flash
  • IMU: MPU6000 (SPI)
  • Barometer: BMP280
  • USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
  • 5hardware UARTS (UART1,2,3,4,6)
  • Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
  • Onbord 16Mbytes for Blackbox logging
  • 5V Power Out: 1.0A max
  • 3.3V Power Out: 0.2A max
  • Dimensions: 30x30mm
  • Mounting Holes: Standard 20mm square to center of holes
  • Weight: 4g

Pinout Diagram:

Tekko32 F4 4in1 mini 45A ESC

SPEC:

  • F4 MCU with BLHELI32 firmware
  • Maximum PWM output upto 96K (default 48K)
  • Amperage meter scale ratio has been adjusted to 168.
  • PWM input, TLM supported
  • Voltage output (VBAT)
  • NO output BEC
  • Supports oneshot / Multishot / Dshot PWM
  • Supports damped light
  • Supports 3-6S lipo input
  • Ext. cap needed for 6s (1000uf 35v for 6s usage.)
  • Mounting holes: 20x20mm(M3)
  • Size:30 x 39 mm
  • Weight: 7.2g

PIN MAP:

 

Atlatl HV micro

Features

  • Compatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.
  • Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.
  • SmartAudio input allows remote control by the flight controller. Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.
  • All parameters are controllable via push-button on the side of the unit, for cases where SmartAudio is not used.
  • MMCX connector is durable and easy to use. Rated for 100’s of mating cycles. Easy and quick antenna changes. No more ripped-off UFL connectors.
  • LED indicators for channel, band, and power. Allows easy check of vTX parameters simply by glancing at the quad.
  • Variable transmit power from 25 mW to 800 mW. Use 25 mW for a race and then easily switch to 800 mW for freestyle.
  • 0.5 mW True Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.
  • Built in microphone, so you can listen to your motors while you fly, no matter how far away you fly.
  • Standard 26mm form factor allows you to mount the Atlatl directly on your flight controller stack.

Specifications

  • Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW
  • Audio: 6.5 MHz Mono
  • Protocol:smart audio2.0
  • Antenna Connector: MMCX
  • Input Voltage: 7 to 28 volts (2-6S LiPo)
  • Dimensions: 30x26mm
  • Mounting Holes: Standard 20mm square to center of holes (M3)
  • Weight: 3.6g

Package Includes:

#20101 Kakute F7 mini V3 & Atlatl Micro VTx STACK
Kakute F7 mini V3 STACK *1
JST SH 8pin 150mm cable*1
JST SH 6pin 150mm cable*1 ( The cable that goes to the CADDX Vista Air Unit is included.)
JST SH 6pin to GH 8pin 150mm cable*1 ( The cable that goes to the DJI Air Unit is included.)
JST SH 6pin to GH 8pin 80mm cable*1  ( The cable that goes to the DJI Air Unit is included.)
80mm SMA–MMCX Cable *1
60mm Antenna *1
150mm 4pin JST GH wire *1

#20135 Kakute F7 mini V3 & Tekko32 F4 4in1 mini 45A ESC STACK
Kakute F7 mini V3 STACK *1
Electrolytic capacito: 1000uF 35v *1
JST SH 8pin to 8pin 65mm cable *1
JST SH 8pin to 8pin 25mm cable *1
JST SH 6pin 150mm cable*1 ( The cable that goes to the CADDX Vista Air Unit is included.)
JST SH 6pin to GH 8pin 150mm cable*1 ( The cable that goes to the DJI Air Unit is included.)
JST SH 6pin to GH 8pin 80mm cable*1  ( The cable that goes to the DJI Air Unit is included.)

#20136 Kakute F7 mini V3 & Tekko32 F4 4in1 mini 45A ESC & Atlatl Micro VTx STACK
Kakute F7 mini V3 STACK *1
Electrolytic capacito: 1000uF 35v *1
JST SH 8pin to 8pin 65mm cable *1
JST SH 8pin to 8pin 25mm cable *1
JST SH 6pin 150mm cable*1 ( The cable that goes to the CADDX Vista Air Unit is included.)
JST SH 6pin to GH 8pin 150mm cable*1 ( The cable that goes to the DJI Air Unit is included.)
JST SH 6pin to GH 8pin 80mm cable*1  ( The cable that goes to the DJI Air Unit is included.)
80mm SMA–MMCX Cable *1
60mm Antenna *1
150mm 4pin JST GH wire *1

Manual:

Kakute F7 mini V3 Manual
Holybro_Atlatl_HV_micro_Manual
Tekko32 F4  4in1 Mini 45A ESC SPEC 

Some Tips:

BLHeli_32 ESC Firmware Overview
GitHub