Home Tekko32 F3 Metal 4in1 ESC
Tekko32 F3 Metal 4in1 ESC
Flight Controller
New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed. using metal case mosfet for better Heat dissipation. We tested in short time on 220A intotal. The actual performance will only limited by the air flow.

Notice: The air flow is very import if you want to run this 4in1 in high current. The input cable(from lipo to 4in1), should be good soldered, and at least 12AWG

PIN MAP

Warning: Please use non-metallic isolation standoffs (marked in red in the diagram above) for the mounting holes on the ESC, Because mounting holes and motor pad are connected.

Some Tips:

Package Includes
Tekko32 F3 Metal 4in1 ESC *1

Electrolytic capacito: 470uF 35v *1

8pin to 8pin 1mm pitch 65mm cable *1

8pin to 8pin 1mm pitch 25mm cable *1

Spec
F3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz

The 4in1 has onboard analog current sensor, and TLM function(then no current reading over TLM)

Using metal case mosfet for better Heat dissipation

Supports Lipo 4-6S

Ext. cap needed for 6s (470uf 35v for 6s usage.)

Size:42 x 42 mm

Mounting holes:30.5x30.5mm

Weight: 12g

Recommended Products