Since the late September, the pit mode outputs on both Atlatl HV and Kopis 1 have been changed into 0.5mw.
KOPIS is a high-performance ready-to-fly FPV racing drone from Holybro, Low-deck design means centralized mass and excellent handling. Stretched-X motor layout is the choice of top racers because the rear props are further from the "dirty air" coming from the front props. The result is smoother cornering and higher top speed. The FPV antenna is in a unique location behind the quad, to protect against damage. Kakute flight controller and Atlatl video transmitter give perfectly integrated control of all quadcopter systems. Tmotor AIR40/2450kv motors give a great balance of raw speed and flight time. They won't kill your batteries either! KOPIS gives all the performance, looks, and durability of a hand-built machine, without ever having to pick up a soldering iron!
5mm Full 3K Carbon Fiber Twill
Counter-sunk screws for great appearance and smooth finish
KakuteF4 FC with soft-mounted gyro for great filtering of vibration
Betaflight OSD included. Monitor voltage and battery capacity in your FPV goggles. Change PIDs and Rates using your transmitter sticks
Atlatl video transmitter:
- 5.8 GHz
- 40 channel
- Transmit Power: 0.5mw(pit mode), 25 mW, 100 mW, 200 mW, 400 mW, 600 mW
- MMCX Antenna connector for easy, secure connection. Won't break or come loose like the IPEX connector used on other vTX.
Control the vTX channel and transmit power from the OSD using your transmitter sticks. No more button-pushing.
Programmable LED board controllable in Betaflight. Buzzer included.
RunCam Swift Mini FPV camera, 1/3? 2.3mm lens.
Adjustable camera tilt from 0 degrees to 90 degrees uptilt.
Serial receiver supported (SBUS, iBUS, Spektrum). Legacy PPM and PWM receivers not supported.
1x KOPIS FPV racing drone
1x 5.8 GHz FPV antenna
8x 5045 tri-blade propeller
1x Battery strap (installed)
1x Gopro4 stand